UBBFriend: Email This Page to Someone!
  Futon Life Forum
  Futon Frame Questions
  Need Replacement Rollers - please help!

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Need Replacement Rollers - please help!
Futon Guppie

Posts: 1
Registered: Dec 2005

posted 12-05-2005 07:18 AM     Click Here to See the Profile for pendragon1998     Edit/Delete Message Reply w/Quote

I'm trying to locate a place to purchase two futon rollers. I'm hoping someone may
either have my part or can point me in a good direction to look.

The part is plastic or nylon and appears to originally have looked like a double-sided glide (a cylinder with a ridge along the center). The dimensions are as follows:

cylinder length: 1 1/8"
cylinder diameter: 3/4"
Inserts ~7/16" into slot
Center ridge thickness ~3/16" (height above main cylinder unknown, since broken)
Threaded to fit a 1/4" bolt (hole runs entire length of roller)

I hope you can help me! I am located in Athens, GA, and bought the sofa second-hand. It doesn't appear to have a brand label anywhere. If it matters, the rollers go on the seat deck, rather than the back deck.

Futon Guppie

Posts: 4
Registered: Dec 2005

posted 12-16-2005 06:24 PM     Click Here to See the Profile for FutonPlanet   Click Here to Email FutonPlanet     Edit/Delete Message Reply w/Quote
FutonPlanet carries a decent supply of glides and futon rollers. Check our website at http://futonplanet.com

We hope we can be of assistance somehow.

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Futon Life Magazine

Powered by: Ultimate Bulletin Board, Version 5.42a
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 1999.