UBBFriend: Email This Page to Someone!
  Futon Life Forum
  FutonLife.com Suggestions/Comments

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Sliders
Futon Guppie

Posts: 1
Registered: Feb 2005

posted 02-13-2005 11:49 AM     Click Here to See the Profile for JaePerk   Click Here to Email JaePerk     Edit/Delete Message Reply w/Quote
I have several broken sliders on my futon which need to be replaced. I am looking for a source where I can purchase new ones. I ordered some from Rockler which were too long as were the clevis pins they shipped. I need some about 1 7/8" long. My clevis pins are about 7/8" long. My futon is identical to "The Basic Bi-fold with Arms" assembly instruction appearing on Futon Life.

[This message has been edited by joetatulli (edited 02-23-2005).]

Futon GURU

Posts: 52
Registered: Feb 2003

posted 02-16-2005 05:46 PM     Click Here to See the Profile for Bryce   Click Here to Email Bryce     Edit/Delete Message Reply w/Quote
Hi JaePerk,

The problem is that different manufactures use different hardware. I have seen no less than a dozen different ones over the years. Try bringing a peice into a local futon store to see if they can match it up with something they have.


Posts: 340
Registered: Jan 2000

posted 02-23-2005 07:52 PM     Click Here to See the Profile for joetatulli     Edit/Delete Message Reply w/Quote
Hi JaePerk:

You can make these parts from wood or nylon stock. Just use the existing part as a model.

You can also find a woodworker or carpenter who may be able to help you make them, or make them for you, at a bulletin board at Home Depot or Lowes.


All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Futon Life Magazine

Powered by: Ultimate Bulletin Board, Version 5.42a
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 1999.